{"id":534,"date":"2013-08-31T01:15:18","date_gmt":"2013-08-31T01:15:18","guid":{"rendered":"http:\/\/foothillscommunityworkshop.org\/?p=534"},"modified":"2026-01-30T23:53:06","modified_gmt":"2026-01-30T23:53:06","slug":"the-first-2-years","status":"publish","type":"post","link":"http:\/\/fcwhack.com\/?p=534","title":{"rendered":"The First 2 Years"},"content":{"rendered":"

August 19, 2013 was the second anniversary of incorporation of FCW. This is an update of the \u201cA Look Back\u201d post of a year ago. In the past year, FCW has greatly increased capability, increased the physical space, and increased membership. It is often good to look at where we have been in order to plan the future.
\nIn the beginning:<\/strong>
\nDan first contacted me (Michelle) about trying to form a local hackerspace in April of 2011. We talked a little but nothing really came of it. Dan registered with hackerspaces.org with the desire to form a hackerspace in the Hickory area. On June 20, 2011, Rich found Dan’s post and contacted him about getting involved. Rich lived in Granite Falls and was also looking for a hackerspace in the area.
\nThe organizational meeting of those interested in forming a hackerspace named the Foothills Community Workshop was scheduled at Rich’s house on July 30, 2011. Six persons were in attendance at that meeting. Rich wanted to do things \u201cbackwards\u201d \u2014 get a location first, then push for members. Four of us: Rich, Dan, Colin, and Michelle put up some initial money to get started.<\/p>\n

\"\"<\/a><\/p>\n

Rich beat the bushes and found a location in an old cotton mill that we could use. As part of the organizational meeting, we checked out possible locations in the mill. We were offered three different locations, but the one we chose would provide us with the most space, and a bathroom.<\/p>\n

\"\"<\/a><\/p>\n

It was somewhat sad looking, divided into two parts. The \u201ccave\u201d was an open space with no lights or power, and the \u201coffice\u201d was a storage area. But, we liked it and a lease was signed so that we could move in, so on August 23, only 24 days from the first meeting, it became home for FCW.<\/p>\n

Over the next several months, all time and resources were spent installing wiring and lights, and cleaning up. We picked up two more members during that time (Warren and Gene) and decided to have an open house in December 2011. It pushed us as we barely got the lights in and some of the machinery moved before the open house.<\/p>\n

Members:<\/strong>
\nFCW started with four members, Dan, Rich, Colin and Michelle. Warren and Gene joined us just before the open house so we had 6 to greet everyone.
\nSince then were the following \u2013 though several stayed for a while then left for various reasons.
\nDec. \u2013 Joe and Buck joined at or just after the open house.
\nJan \u2013 Ross, Shawn, Seth and Craig
\nFeb \u2013 Clarence
\nMar. — Vic
\nJune \u2013 Mike, Andy, Jared and Nick
\nAug. \u2013 Rick
\nSept. \u2013 JD, Ben, Chris
\nOct. \u2013 Marlyn, Brandon
\nNov. \u2013 Ed, Dave, Kaleb
\nDec. – John, Jay
\nMar. – Knox
\nApr. – Derek, Lin
\nJune \u2013 David, John
\nJuly \u2013 Bruce
\nAug. – Jeff, Jaden, Chris<\/p>\n

FCW is starting the 3rd year with 22 members. At this time, we know of at least eight that have indicated a desire of joining soon, so that should increase our income and expertise.
\nWork areas:<\/strong>
\nAt the first open house in December 2011, we had just got the machine shop equipment moved, but not ready. There was a radial arm saw (inoperable), planer (inoperable) and a circular saw in the wood working area. There was one 120V line on the West wall (office side) of the cave but no power on the machinery side. Outlets had just been installed in the office area. None of the rooms were built so there were signs saying where the classroom and railroad\/modelshop would be. The electronics area was operational, but barely, as most of the equipment was brought in by Rich and Michelle just for the open house. We had just bought the large tables from a WPCC auction so we had most of the tables, but some of the chairs were bad.<\/p>\n

\"Rich<\/a>
Warren and Rich with CNC mill<\/figcaption><\/figure><\/p>\n

The first area to actually become fully useful was the machine shop<\/strong>. In January 2012, we got some power on the cave East Wall so that the mill and lathe could be used. It took several more weeks before they were leveled and set up to go. The major equipment in it are a lathe, CNC mill, bandsaw, and drill press. Between Rich and Warren, there are numerous small tools as well. Vic donated a good amount of material (steel, aluminum, and brass) to the shop.<\/p>\n

 <\/p>\n

\"FCW-Rooms-20120305-1024x768\"<\/a>
Warren checks out the model shop wall<\/figcaption><\/figure><\/p>\n

Work on the rooms seemed to drag on forever, but finally, with Joe and Gene leading, the walls started up. Rich did most of the wiring for the room walls and some serious head scratching as an outlet box was completely covered up by drywall. Seth arranged for us to get some flooring from Habitat (many thanks to them) so that we could have decent wood floors in the rooms. We did expect any day to find that a forklift had crashed through our ceiling into one of the rooms, but that was finally reinforced and the rooms started to take shape. They were ready early in the Summer.<\/p>\n

\"Railroad-closeup-1-comp\"<\/a>
The HO Railroad<\/figcaption><\/figure><\/p>\n

The railroad<\/strong> was brought in by Gene. It was at his house and had to be dis-assembled, moved and re-assembled. Gene and a crew were able to do so early in the Summer, then Gene recruited Warren to help put it back together. There is a lot of detailed work on the railroad and the tracks needed to be aligned so it took quite a while. It is operational and impressive now, but Gene, in the true Hacker spirit, is already adding on and tweaking it. He also has the materials to create scenery and accessories for the railroad (and other models).<\/p>\n

\"GEDC0686-1024x768\"<\/a>
The electronics shop<\/figcaption><\/figure><\/p>\n

The electronics<\/strong> area soon became\u00a0 operational. There is a reasonable set of equipment at the space, including a Pace surface mount re-work station, several oscilloscopes, meters, and function generators. We have several trainers and can work with numerous microprocessors and digital devices. Some RF equipment and fabrication equipment is still being scrounged.<\/p>\n

 <\/p>\n

Somewhere along the line, Dan (I think) brought in some books to start a library. Then Dan, Michelle, Rich, and later JD, Derek, and Ross populated the library so that it now contains books, on computers, operating systems, programming languages, micro-controllers, analog and digital electronics, physics\/chemistry\/math, networking, machining, geek fiction and other topics. The library has outgrown its location so it will be moved to the classroom as soon as shelves can be built.
\n\"FD-2012-cropped\"<\/a>Michelle and Colin are Amateur Radio operators. After Buck joined and Dan got his Ham license, we started a Ham station<\/strong>. Michelle and Colin furnished most of the equipment so that we have HF and VHF capability. Ross, JD, Ben, and Bruce are also hams and several more are interested in getting a license. We got a station call of K4FCW and have participated in two field days and several contests. The station has HF and VHF multi-mode capability and has recently added digital modes. We hope to get into Software Defined Radio in the near future.<\/p>\n

 <\/p>\n

\"SONY<\/a>
Cinderella Carriage<\/figcaption><\/figure><\/p>\n

The woodworking area<\/strong> was possibly the last to become useful, but has since become the most productive. We had only a few items at the December 2011 open house. Joe brought in a few more, but it was only after Ross and Rick became active that it really became useful. Besides the circular saw, radial arm saw and planer (now all operational), we have a sander, bandsaw, shaper, scroll saw, lathe and jointer. A dust system has been installed and two CNC routers are operational. The shop was used to make much of the Fright night props, a Cinderella carriage for a high school play, a sleigh for the December open house in 2012, and a \u201ccart of the dead\u201d for a local production of Spamalot.<\/p>\n

\"\"<\/a><\/p>\n

The classroom<\/strong> has been used for several classes and workshops. It has a projector, dry erase board, and room for 14 students or about 30 seated in a lecture configuration. There is a rack of equipment available for network training and a high speed copier that we bought as a carcass and repaired. The classroom is available for other groups to use as well. We are planning many more classes\/workshops and a periodic movie night for it.
\nThe original office area now houses electronics, the ham station, and a lounge<\/strong>. The lounge has a 46\u201d LCD TV, a 36\u201d CRT TV, PS1, PS2, Sega, Wii, Xbox, and Xbox 360 game consoles, and a Mame machine which will play arcade games. We are still configuring the mame machine and collecting games for the consoles. It is also available for outside groups.
\nAttached to the lounge is a kitchen<\/strong>, containing two refrigerators, a microwave oven, coffee pots and a popcorn machine. We are working on adding additional capabilities to it.
\nRecently, we have added a storage area<\/strong> and a tiled room that we call the lab<\/strong>. The lab will be fixed up with fume hoods for additional capabilities. With the addition of those two areas, we have control of a lobby<\/strong> area that belongs to the landlord but we can use for temporary purposes.<\/p>\n

\"Laser2\"<\/a><\/p>\n

General fabrication equipment available now includes: a welder capable of welding steel, stainless steel, and aluminum; a Mendle max 3D printer; and a 90W Laser cutter, capable of cutting wood, acrylic, cloth and leather; and engraving glass.<\/p>\n

 <\/p>\n

 <\/p>\n

Events:<\/strong>
\nSince getting the space usable, we have had four open houses; operated two Ham Radio Field Days in June, and the ARRL November Sweepstakes; and have had displays at the 2013 Linuxfest in Charlotte, and the NC Makerfaire in Raleigh.<\/p>\n

\"Fright<\/a>
The electric chair — a shocking experience on Fright Night<\/figcaption><\/figure><\/p>\n

Our biggest project for the 2012 was Fright Night, a three night event for Halloween. Ross coordinated the event with he and Rick building many of the props. The building owner allowed us to use a large area behind our space to make a series of fright venues which included a Mad Scientist lab, a Haunted Graveyard, the Dark Forest (complete with werewolf), an Electric Chair, a Guillotine, and an Asylum. Considering that we were pressed for time and had little PR, it went surprisingly well and everyone is looking forward to this year, where the main additional venue will be a \u201clive autopsy.\u201d<\/p>\n

\"winter2-1024x819\"<\/a>
Santa visits FCW<\/figcaption><\/figure><\/p>\n

At the 2012 Christmas open house. Warren was Santa and we set up a blue screen with a large sleigh so that kids could have their picture taken with Santa in the sleigh in one of several settings: the Alps, a country road, in orbit, the desert, or on the moon. We had a few families that kicked Santa out and had a family picture in the sleigh.
\nThat went over so well, that the used the Cinderella carriage at the August 2013 open house to allow kids to have a picture with Cinderella (guest Paula) in the Carriage.
\nClasses:<\/strong><\/p>\n

\"Engines1-1024x768\"<\/a>
Steam engines<\/figcaption><\/figure><\/p>\n

We started some classes in 2012. Rich and Warren taught a safety class on machining early in the Summer. Rich later followed that up with a multi-week machining class in which a small air\/steam engine was fabricated. After a donation from the local Radio Shack (again many thanks), Rich also taught a simple Introduction to electricity\/electronics class. Michelle did an overview of C\/C++ and later, an Introduction to Digital Electronics \u2013 Gates. In 2013, we have had another Machining project class, a class on the ST32F4 microprocessors, a Ham Radio Technician license class, and two classes on blender.
\nMisc:<\/strong>
\nA 501(c)(3) application was filed in May 2012. It was finally approved in April 2013 so donations to FCW can be tax-deductable.
\nComing up:<\/strong>
\nSeveral FCW members are planning personal and group projects. At the space, work on the 2013 Fright night is underway. We are in the planning stage for the Christmas open house. A lan party and a regular game night is also being planned. Upcoming classes include, various microcontrollers, Python, Networking, Ham Radio, Machining, Basic Woodworking, CAD, Digital Electronics, models, mask making, basic computers and Electronics. A group build of 3D printers is being organized, and we are also working on a group solar panel build and an antenna party. Expanding interests are alternate energy, chemistry, biology, casting, glass blowing, and pottery. FCW is exploring grant and donation opportunities. We are hoping to do joint projects with other local organizations and other hackerspaces. We will be installing more circuits to handle the additional machine load and working to obtain a heat pump. We can always use more members and PR. The fun continues, who knows what ideas someone will come up with next.<\/p>\n","protected":false},"excerpt":{"rendered":"

August 19, 2013 was the second anniversary of incorporation of FCW. This is an update of the \u201cA Look Back\u201d post of a year ago. In the past year, FCW has greatly increased capability, increased the physical space, and increased membership. It is often good to look at where we have been in order to … Continue reading The First 2 Years<\/span> →<\/span><\/a><\/p>\n","protected":false},"author":3,"featured_media":0,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_bbp_topic_count":0,"_bbp_reply_count":0,"_bbp_total_topic_count":0,"_bbp_total_reply_count":0,"_bbp_voice_count":0,"_bbp_anonymous_reply_count":0,"_bbp_topic_count_hidden":0,"_bbp_reply_count_hidden":0,"_bbp_forum_subforum_count":0,"footnotes":"","_links_to":"","_links_to_target":""},"categories":[1],"tags":[],"class_list":["post-534","post","type-post","status-publish","format-standard","hentry","category-uncategorized"],"_links":{"self":[{"href":"http:\/\/fcwhack.com\/index.php?rest_route=\/wp\/v2\/posts\/534","targetHints":{"allow":["GET"]}}],"collection":[{"href":"http:\/\/fcwhack.com\/index.php?rest_route=\/wp\/v2\/posts"}],"about":[{"href":"http:\/\/fcwhack.com\/index.php?rest_route=\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"http:\/\/fcwhack.com\/index.php?rest_route=\/wp\/v2\/users\/3"}],"replies":[{"embeddable":true,"href":"http:\/\/fcwhack.com\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=534"}],"version-history":[{"count":6,"href":"http:\/\/fcwhack.com\/index.php?rest_route=\/wp\/v2\/posts\/534\/revisions"}],"predecessor-version":[{"id":755,"href":"http:\/\/fcwhack.com\/index.php?rest_route=\/wp\/v2\/posts\/534\/revisions\/755"}],"wp:attachment":[{"href":"http:\/\/fcwhack.com\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=534"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"http:\/\/fcwhack.com\/index.php?rest_route=%2Fwp%2Fv2%2Fcategories&post=534"},{"taxonomy":"post_tag","embeddable":true,"href":"http:\/\/fcwhack.com\/index.php?rest_route=%2Fwp%2Fv2%2Ftags&post=534"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}